Note: Crating and shipping charge is $100.00 for commercial address and $150.00 for residential address.
#15425H: 2.25" I.D. Coil Springs:
These are new custom made springs by the high-tech spring manufacturer Hyperco, made especially for Classic Motor Works for use on the rear of M-series and pre-M TVRs.
These lightweight springs have a free-length of 10" and a spring rating of 110#/sq. in. They are designed to be used with height adjustable shocks such as AVOs, etc. and are powdercoated for a long lasting finish and come with a lifetime warranty from Hyperco.
$99.50 price is per spring
|
 |
#15606H: 2.50" I.D. Coil Springs:
These are high-tech springs from the manufacturer Hyperco designed for use with height-adjustable shocks such as AVO, etc on the front (or rear) of M-series and pre-M TVRs.
They have a 10" free length and a spring rating of 150#/sq. inch. They are powdercoated for a long-lasting finish and come with a lifetime warranty from Hyperco.
$69.50 price is per spring
|
 |
#GR31033: Dome Light Lens for Grantura - 2500 series TVRs:
Finally, we have received a shipment of these great dome light lenses. They have been reproduced in hard tooling right here in the USA and are cast in crystal clear polycarbonate which provides extra strength. These will not craze and crystalize like the original lenses sourced from the Austin A40. They fit exactly and the mounting tabs have been extended by .050 " to make sure they stay in the chrome mounting base better than the original ones. This is one fine reproduction part and once this supply is exhausted, they will probably not be reproduced again. Now is the time to get one and a spare.
$49.50 ea
|
 |
16373F and 16375F: M-series Fiberglass Bumpers (Black)
Classic Motor Works is pleased to offer fiberglass bumpers finished in gloss black to fit M-series TVRs. These bumpers are quite labor intensive to produce and after months of work, we now have them available in black. (We are also working on making them available in a chrome finish later this year.) These bumpers come complete with mounting hardware to fit on your M-series TVR and are a good bit lighter in weight than the rubber or chrome steel versions.
$138.50 price is per bumper |
 |
035C062B: 280i Standard Front Coil Springs
We have contracted with a US spring manufacturer to produce these springs to original speficiation and we now have them in stock. If the springs on your wedge have sagged over time, here is the perfect replacement item for you.
$73.25 |
 |
035D128B: 280i Standard Rear Coil Springs
We have also had the rear springs manufacturered to original specification and have them in stock. So, if you have been dealing with sagging rear springs, here is the perfect replacement item for you.
$73.25 |
 |
125U378A: 280i Series 2 Convertible Front Spoiler
At long last, Classic Motor Works is proud to offer front spoilers for the Series 2 280i Convertible. These are handmade for us as they were no longer available.
Since each TVR seems to be slightly different, some fitting and adjusting may be required.
$395.00 |
 |
15051: 2.5 litre Oil Filter Element
Here is the oil filter element for the canister-style oil filter on your TVR 2500 or 2500M.
$14.25 ea |
 |
CK 105: 2500 Lubrication Data Plate
Here is a new lubrication data plate specifically for the TVR 2500 (Vixen body). A nice finishing touch for your restoration or to replace a worn or damaged one on your car.
$25.00 |
 |
GR31028B: Layton Sportscars Ltd. Chassis VIN Plate
This is the VIN plate for the firewall of your Grantura with the blue background. Others had a black background. We have both in stock.
$35.00 |
 |
GR31043: Griffith/Grantura/Tuscan Engine Bay Rubber Matting
This is an item that has taken more than a year to source, but it is the correct ribbed rubber matting that was used over the footwells in the engine bays of the Griffiths, Granturas, Tuscans, etc. If the matting in your car is rotten, missing, torn, etc, here’s your opportunity to get the correct item to replace it with. A great finishing touch to your restoration.
$74.50/pair |
 |
025E734P: 280i Piper ‘Ultimate Camshaft Package’
This is the Piper BP285 ‘Ultimate Road Cam Kit’, which includes the cam, cam followers, valve springs and cam lube. The advertised power band with this cam is from 2200 to 6800 rpm and would help you realize an approximate 20 horsepower increase. This is Piper’s Repro version, brand new in the box, ready for installation.
$259.00 |
 |
AVOCOVR: AVO Coilover Package
This package includes a pair of front AVO dual adjustable shock absorbers and a pair of rear AVO dual adjustable shocks along with a full set of high quality Hyperco powder coated coil springs. The coils are rated at 150# front and 110# rear and have a 10 free length for both front and rear. They are 2.5” I.D. front and 2.25” I.D. rear. Retail on these items if purchased separately is $1,038.00. The package price is only $945.00 plus shipping. A shock adjusting wrench is also included.
An assembly charge would be additional.
|
 |
025Q023CF: Tasmin/280i Centerforce Clutch Package
This includes your dual friction clutch disc and pressure plate. This package is said to increase the life of your clutch disc, handle increased horsepower and torque and smooth out clutch engagement.
$399.50 |
 |
